Skip to main content

DUCTA-SERIES™ Rotary Foundry Drums

general-kinematics-ducta-series-rotary

High-Performance Rotary Machines for Serious Metalcasters

 

 

Innovative features. Less maintenance. Awesome Service.

How do you make a product better? You ask the people who are using it. That is exactly what GK did when designing the DUCTA-SERIES™ line of rotary drums. Easy to service design, liners that don’t require a football team to install, and a total package concept with GK Sales and Service to back you up are just a few of the advantages GK’s DUCTA-SERIES™ brings to your foundry.

 

Two styles to best fit your process.

Being an engineered solutions company means we are always looking for different and better ways to improve the equipment going into your process. The same goes with our rotary foundry drums. General Kinematics evaluates your process requirements and installation location, then creates a custom solution ideal for you. We have different design philosophies depending on your application and process layout.

XL Series Rotary Drums

Our lowest maintenance option is the DUCTA-SERIES XL line of rotary drums. These drums separate sand, tramp metal, and/or media from the drum body into a vibratory or belt conveyor located below. This eliminates the need to ever replace your drum body, as no material comes in contact with the shell. It also allows multiple levels of screening and classifying of sand and metallics outside the drum body. Wear areas are easy to access and easy to replace abrasion resistant panels that last and last.

 

SL Series Rotary Drums

Another option is our DUCTA-SERIES SL line of rotary drums. These drums utilize the inner shell of the drum to convey material back to the inlet sand discharge / media return wheel, but are easier to service than traditional designs. GK’s LOCK-TITE liner system panels are easier to replace, and allow easy access to the area between the liner and the body for quick cleaning and repair. DUCTA-SERIES™ SL bodies and LOCK-TITE liners are also available as a retrofit for existing rotary drums, so you can upgrade existing installations without completely converting your foundry line.

DUCTA-CLEAN® Rotary Media Drums

Ducta-Clean Rotary Media Drums

DUCTA-SCREEN™ Rotary Shakeouts

Ducta-Screen rotary shakeouts

DUCTA-SPRUE® Rotary Sprue Mills

Ducta-Sprue Rotary sprue cleaner

DUCTA-COOL™ Sand & Casting Cooling Drums

Ducta Cool Rotary Cooler

DUCTA-CLAIM™ Rotary Lump Crusher / Sand Reclaimer

Ducta-Claim sand reclaimer lump crusher

Rotary Dross Reclaimers

Rotary Dross Reclaimers

Rotary Dryers

Rotary Dryer

Rotary Sand Screens

Rotary Sand Screens

 

 

FINALLY… LINERS THAT make sense.

Both styles of GK DUCTA-SERIES drums utilize GK’s proven LOCK-TITE liner system, our proven fabricated bolt-in liner cartridges that offer long life and easy replacement. Liners are constructed from abrasion resistant materials, including AR 450+ or optional TRI-BRAZE(R) wear plate for significantly longer service life than austempered ductile liner panels.
Each panel is designed to maximize service life and process throughput… no cookie cutter cast panels that only kind of do the job. And unlike those old cast grids, if your process requirements change, you can easily modify LOCK-TITE liners to move, lift, and screen the way you want them to.
Have an existing rotary drum that you want to upgrade to use LOCK-TITE liners? No problem! Many of North America’s leading foundries have already made the switch to GK LOCK-TITE liners, drum bodies, and components to maximize the performance of their existing rotary drums.

LOCK-TITE™ Replacement Rotary Liner Upgrade Kits

Lock tite liner system

Replacement Rotary Drum Body / Liner Assemblies

Rotary Drum Body Replacement

Rotary Drum Drive Conversions

Rotary Drum Drive Conversions