Foundry Case Studies
Latest Posts
Case Study: SPIRA-COOL® Solution
Challenge A North American foundry customer had two existing parallel lines in their facility. The second line was to be modified and run a special alloy material. To compound this […]
January 6th, 2015 | 2 min Read
Case Study: Inclined Conveyors
Challenge A Midwest foundry had limited space for their sand reclamation system. Unable to expand the building to gain the room needed or reposition their system to fit the necessary […]
December 30th, 2014 | < 1
Case Study: VIBRA-MILL® in Action
Challenge A Midwest foundry required a unit that could not only handle their large, unique-shaped, no-bake molds but also process to their production requirements. Approach After researching equipment providers, the […]
October 30th, 2014 | < 1
Case Study: Rotary Drums Done...
Challenge A Canadian foundry had several rotary drums in their facility and were looking to update one of their rotary drums. Their application required careful handling of intake manifolds, yet […]
August 1st, 2014 | 2 min Read
The Ultimate Sprue Handling Machine
Challenge The customer had a series of existing metal belt apron conveyors that transported sprue up a large incline. Their system included General Kinematics tunnel conveyors that led up to […]
June 27th, 2014 | < 1
Vibratory Conveyor Solution
Read about this foundry that depended on their General Kinematics conveyor to provide the performance and reliability they needed to keep their facility running. “Atlas Foundry Co., an established supplier […]
June 13th, 2014 | 2 min Read
