PARA-MOUNT® Vibratory Feeders
Mining and Minerals Solutions
Feeders for Mining
-
“QUICK-SHIP” Pre-Engineered Vibrating Feeders
-
Direct-Drive Vibratory Feeders
-
PARA-MOUNT II® Vibratory Crusher Feeder
-
PARA-MOUNT II® Vibratory Feeders
-
UN-COALER® Bin Activator / Feeder
General Kinematics original PARA-MOUNT® Vibrating Feeders are designed to control the flow of bulk materials through the use of GK’s proven two-mass drive system. This system allows the feeder to automatically compensate for material head load and weight effect. This anti-dampening performance results in accurate volumetric feed rate control regardless of material headload variations.
PARA-MOUNT feeders utilize rubber springs and are designed to excel in difficult environments, including those with explosion-proof requirements. Each feeder is custom engineered for your specific application and process requirements.
- FEATURES
- CASE STUDIES
FEATURES
- Available with fixed and variable rate control packages.
- Two-mass drive system compensates for material load.
- Uses up to 2/3rds less horsepower compared to similar sized direct drive feeders.
- Can be constructed from mild steel, abrasion resistant steel, stainless, or other exotic materials.
Case studies
-
GK Two-Mass and Brute Force Technologies Working in Harmony
The “right fit for the right job”! Challenge A waste to energy facility in the New York area operates with a collection pit under the Boiler which is constantly filling with both wet and dry combined ash 24 hours a day. This ash is loaded out with a clamshell crane directly onto a General Kinematics…
-
Case Study: Not Your Ordinary Feeder
Challenge At the bottom of their rotary train dump, a power plant on the Ohio River near Paducah, KY had two reciprocating feeders that were no longer feeding reliably and needed to be replaced. Approach After inspecting the installation, General Kinematics Vibratory Feeders with Variable Force (VF) wheels were recommended. With these feeders, a feed…
-
Case Study: Modular Feeders
Challenge A major power company needed to replace two existing GK feeders that had been in use for over 35 years. During that time, the space had become very crowded and hard to maneuver within. Only small pieces could be moved into place, one at a time, to replace the existing units. Once in place,…