Designed for recyclers processing 150 yd/hr and less, GK’s portable CD-Express(TM) features Para-Mount II 2-mass vibratory feeder for system loading and presentation to sorting system. From loading, material is then processed over GK’s Finger-Screen to remove fines and under sized material for Alternate Daily Cover or other applications. Fines are then conveyed under a magnet or over a magnetic head pulley to remove any small metals. Oversized material is conveyed through a pick station and is sorted into roll-off containers or hoppers for contained material separation. The CD-EXPRESS® recycling system can be set up quickly, and with addition of De-Stoner Air classifier at the end of the line to separate lights and heavies such as paper and rock, recyclers can divert up to 90% of recyclable material.

Related GK News

spending

President’s Blog: Total cost of ownership.

Another day, another call from a foundry that “saved money” buying low-value vibratory equipment from our competition.   This time the call was in reference to a group of machines engineered and manufactured by a company that used erroneous engineering calculations. As a result, from day one of operation, the equipment cracked and broke. This […]

Read More
bolting a rocker leg

How to Change a Rocker Leg

Generally used to guide the movement of the conveying surface in the desired direction, rocker leg (or ductile stabilizer) condition should be inspected as per the pm schedule for each machine.   Once the rocker leg has been identified as needing to be replaced the rocker leg should be replaced immediately to avoid damaging the […]

Read More
Spring Replacement

How to Replace a Spring

In an effort to promote proper maintenance procedures, below is a step-by-step guide to safely replacing pigtail coil springs.   Should a spring that needs to be replaced be found during inspection or while the unit is in operation, it must be replaced immediately to avoid overstressing remaining coil springs as well as causing structural […]

Read More