Reducing and maintaining sand temperatures in foundry applications is essential to efficient foundry performance. Reduction in sand temperatures can be accomplished in a variety of General Kinematics equipment solutions, including devices such as our VIBRA-DRUM® Sand and Casting Processors and our Vibratory Fluid Bed Sand Coolers.

The perfect accessory for these devices is found with GK’s SPRAYCOOL” water addition systems. SPRAYCOOL automatically responds to varying in-feed sand characteristics such as temperature and volume, and provides just the right amount of moisture to assure desired discharge temperature and moisture content.

Of course, maximum efficiency occurs when the in-feed material is in the form of a homogeneous mixture, so it is suggested that a blender be used before entry into the cooler.

The SPRAYCOOL is an economical method to assure that the flow of return sand is conditioned to exacting specifications.

Related GK News

spending

President’s Blog: Total cost of ownership.

Another day, another call from a foundry that “saved money” buying low-value vibratory equipment from our competition.   This time the call was in reference to a group of machines engineered and manufactured by a company that used erroneous engineering calculations. As a result, from day one of operation, the equipment cracked and broke. This […]

Read More
bolting a rocker leg

How to Change a Rocker Leg

Generally used to guide the movement of the conveying surface in the desired direction, rocker leg (or ductile stabilizer) condition should be inspected as per the pm schedule for each machine.   Once the rocker leg has been identified as needing to be replaced the rocker leg should be replaced immediately to avoid damaging the […]

Read More
Spring Replacement

How to Replace a Spring

In an effort to promote proper maintenance procedures, below is a step-by-step guide to safely replacing pigtail coil springs.   Should a spring that needs to be replaced be found during inspection or while the unit is in operation, it must be replaced immediately to avoid overstressing remaining coil springs as well as causing structural […]

Read More