Foundry Case Studies
Latest Posts
Case Study: Reliable Running Screener
Challenge Fall River Foundry, a modern independent non-ferrous foundry, brass die caster and manufacturing company, required a method to reclaim small metallic pieces from their leftover sand, as well as […]
November 18th, 2013 | 2 min Read
Case Study: High Flow Feeder...
Challenge A Midwest foundry required a method to transfer prepared sand in bypass mode to deliver sand to a secondary molding area. The existing chute was leaking, plugging and causing […]
November 4th, 2013 | < 1
Case Study: No-Bake Foundry
Challenge A Midwest no-bake foundry had two objectives to improve their business– to increase production rates and develop larger mold sizing (5 foot square). In review of their existing process, […]
October 15th, 2013 | 2 min Read
Case Study: Zinc Recovery System
Challenge A Midwest zinc company had utilized a General Kinematics VM-120 VIBRA-MILL® with great success for a number of years as an off-line process for reclaiming zinc dross. But as […]
October 8th, 2013 | 2 min Read
GK’s VIBRA-DRUM® solves Oil City’s...
Challenge Oil City Iron Works, Inc. is a Texas based foundry specializing in gray iron casting, ductile iron casting, iron machining, ni-resist casting, and heat treatment. They currently have two […]
March 20th, 2012 | 2 min Read
Canadian foundry upgrades rotary media...
Challenge A Canadian metal casting facility had an existing rotary media drum that was due for replacement. They were looking to upgrade from their old style rotary drum to a […]
February 24th, 2012 | 2 min Read