GK Blog
Latest Posts
Automotive Shredder Residue (ASR) Processing
At the end of their lives, automobiles are sent to specialized material recovery facilities (MRFs) that shred or break them down into more manageable sizes for recycling, resale, and reuse. These broken-down materials are known as auto shred residue, or ASR. According to the Automotive Recycling Association (ARA), more than 4 million automobiles are recycled […]
July 30th, 2026 | 3 min Read
Dump Feeder
Llambec’s years of design and experience in Vibratory Equipment were again put to the test when approached by Boynton for their Platinum Mine in the Pilanesberg to find a solution to the lack of sufficient feed into the plant from their existing Tip Areas, which had been ongoing for a few years. Three tip areas […]
July 8th, 2026 | < 1
Ferro Silicon Fine Screening
Llambec was approached by a company that produces Ferro Silicon for Densification purposes. Screening Ferro Silicon at micron sizes below 200 efficiently has always been a major problem, resulting in Low capacities, efficiencies, and high maintenance costs. Llambec technology replaced the existing circular Motion Screens used in the industry and, after lengthy trials, tests, and […]
July 8th, 2026 | < 1
Kinetic Screen
Two Kinetic Energy Saving Screens were installed at Exxaro R & D as a pilot Plant for test purposes on Coal and Iron Ore. Both Screens are 1500 wide x 3660 long. One is a Double-Deck Kinetic Screen; the other, a Single-Deck, both capable of handling 250 tph. As can be seen from the pictures […]
July 8th, 2026 | < 1
Llambec Cooling Tray Furnace Feeder
The GK Llambec team was approached to assist a customer with a problem they were having with feeding Steel Slithers and removing the sand/rust stuck to them. The purpose of the Screen is to control the Steel Slithers into Baskets 1, 5 m³ Volume with other Ingredients added, which is then removed and stored for […]
July 8th, 2026 | < 1
Llambeck By-Pass Bin
A Large Platinum Mine in the Rustenburg area had a By-Pass Bin System used when the Plant was not in operation. Two main conveyors running in parallel, 2 m apart, could not be fed by two Brute Force Feeders with the correct tonnage. One of the feeders had a starvation problem due to incorrect Bin […]
July 8th, 2026 | < 1
Contact US
