Foundry Case Studies
Latest Posts
Case Study: Iron Recovery Mastered
Challenge A Midwest foundry struggled with getting core sand to break down in their existing system. The core sand had iron metallics mixed in that needed to be extracted. A […]
April 21st, 2014 | 2 min Read
Case Studies
Read More
Case Study: Effective Distribution of...
Challenge An aluminum disk manufacturer on the east coast was looking for a better solution to meter their product. This was not the only challenge though – they also needed […]
December 27th, 2013 | 2 min Read
Case Studies
Read More
Case Study: Sand Reclaim Systems
Challenge Thousands of dollars were being wasted at an aluminum foundry due to inability to reclaim sand from their process. In addition, disposal costs were exorbitantly high and hurting the […]
November 25th, 2013 | < 1
Case Studies
Read More
Case Study: Reliable Running Screener
Challenge Fall River Foundry, a modern independent non-ferrous foundry, brass die caster and manufacturing company, required a method to reclaim small metallic pieces from their leftover sand, as well as […]
November 18th, 2013 | 2 min Read
Case Studies
Read More
Case Study: High Flow Feeder...
Challenge A Midwest foundry required a method to transfer prepared sand in bypass mode to deliver sand to a secondary molding area. The existing chute was leaking, plugging and causing […]
November 4th, 2013 | < 1
Case Studies
Read More
Case Study: No-Bake Foundry
Challenge A Midwest no-bake foundry had two objectives to improve their business– to increase production rates and develop larger mold sizing (5 foot square). In review of their existing process, […]
October 15th, 2013 | 2 min Read
Case Studies
Read More