Pictured is a new VIBRA-MILL® Drum being assembled in our factory for shipment later this month.
 
The VIBRA-MILL® Drum continuous-flow sand reclaimer is designed for continuous and efficient lump reduction of no-bake or chemically bonded sand. The VIBRA-MILL® Drum combines vibration, agitation, tumbling, abrading, and scrubbing for complete and continuous lump reduction to original grain size. Field results show sand reduced 100% minus 20 mesh with original size distribution, and corresponding reduction in L.O.I.
 
Visit our foundry portal for more information on this and our other sand reclamation products:

http://www.gkfoundry.com/

Related GK News

spending

President’s Blog: Total cost of ownership.

Another day, another call from a foundry that “saved money” buying low-value vibratory equipment from our competition.   This time the call was in reference to a group of machines engineered and manufactured by a company that used erroneous engineering calculations. As a result, from day one of operation, the equipment cracked and broke. This […]

Read More
bolting a rocker leg

How to Change a Rocker Leg

Generally used to guide the movement of the conveying surface in the desired direction, rocker leg (or ductile stabilizer) condition should be inspected as per the pm schedule for each machine.   Once the rocker leg has been identified as needing to be replaced the rocker leg should be replaced immediately to avoid damaging the […]

Read More
Spring Replacement

How to Replace a Spring

In an effort to promote proper maintenance procedures, below is a step-by-step guide to safely replacing pigtail coil springs.   Should a spring that needs to be replaced be found during inspection or while the unit is in operation, it must be replaced immediately to avoid overstressing remaining coil springs as well as causing structural […]

Read More