Case Studies
Latest Posts
Case Study: On the Hunt...
On the Hunt for a Screening Material Solution Challenge A customer had an existing system that used a grizzly section running perpendicular to the material flow stream. The grizzly section […]
March 24th, 2014 | 2 min Read
Case Studies
Read MoreFiberglass is no match for...
Fiberglass is no match for GK’s VIBRA-DRUM® In Paris March 11th – 13th? Visit GK at JEC 2014 to learn more about GK and the fiberglass industry! Challenge Chopped […]
March 12th, 2014 | 2 min Read
Bulk Processing Case Studies
Read MoreCase Study: C&D Systems at...
Challenge A new prospect in Ohio came to General Kinematics seeking assistance in the development and installation of a new C&D Sorting System. This process took over two years working […]
January 9th, 2014 | 3 min Read
Case Studies
Read MoreCase Study: UMO to the...
Challenge A successful North American scrap metal recycling company decided to research upgrading their facility. Operating a fully integrated facility, they purchase a wide range of ferrous and non-ferrous […]
January 2nd, 2014 | 2 min Read
Case Studies
Read MoreCase Study: Effective Distribution of...
Challenge An aluminum disk manufacturer on the east coast was looking for a better solution to meter their product. This was not the only challenge though – they also needed […]
December 27th, 2013 | 2 min Read
Case Studies
Read MoreCase Study: How GK Removed...
Challenge General Kinematics was notified that vibration was being transmitted to neighborhood homes in the Green Bay area. Due to the unusually high water table, the massive balanced units installed […]
December 20th, 2013 | 2 min Read
Case Studies
Read More